• LED Signage

    Scroll daily or emergency information, including bell schedules, daily announcements, synchronized time and shelter-in-place instructions on one sign or across locations.

    PRODUCT OVERVIEW

     

    • Reach anyone, anywhere with visual messaging you can deploy as easily as sending an email or tapping on your smartphone.
    • Designed for communication in noisy environments.
    • Boost customer, employee or patient experience and satisfaction with focused programming.

     

    PRODUCT FEATURES

     

    • Available in 1, 2, 3 or 4-line signs.
    • Indoor and outdoor models.
    • Small, medium and large sizes for classrooms, offices, auditoriums, gymnasiums, cafeterias, waiting rooms, manufacturing floors and more.
    • Initiate media content from emails, wireless buttons and more, with click, tap, or drag-and-drop ease.
    • Automated messages can be activated when integrated with fire alarms, doors, security cameras, etc.

     

    PRODUCT BENEFITS

     

    • Visual messages capture attention in noisy environments.
    • Equal access to information for the hearing impaired.
    • Coordinated messaging across locations.
    • Integrates with existing technology for automatic alerts in the event that a door is forced open, a fire alarm pulled, motion is detected, etc.
  • REQUIREMENTS

    LED signs are available with standard AC power for indoor and outdoor and multiple sizes (1, 2, 3 or 4-line models).

    Software

     

    • LED Signage Module
    • Tier 3 License per device

     

    Equipment

     

    • Server Platform - one of the following components:
      • Small Intel Server: Model-NUC Small Form Factor (LSI-H10200)
      • Dell Server: Dual Power, Hardware RAID (LSI-H10302) 
      • Virtual Server: Requires client to provide virtual environment and network/tech support
      • Customer Provided Server: Minimum server requirements*
    • LED Signage – Standard AC Powered Sign (indoor and outdoor)
      • Single Port Ethernet to RS232 Adaptor (LSI-H18501)
      • Sizes available in 1, 2, 3 or 4-line signs

     

    Network

     

    • Server
      • 1 static IP, subnet, gateway, DNS, per device
        • 3 static IPs, subnet, gateway, DNS, per device if using a redundant configuration
      • Standard power (110V or 220V) per server
      • Ethernet network connection required for each server
      • UPS recommended
      • It is the responsibility of the customer to appropriately configure their network equipment so that the server pair appears to be residing on the same network and subnet.
      • NOTE: Serial and parallel ports have been disabled on the LSI server

     

    LED Signage (Standard AC Powered Signs)

     

    • Standard power required at each sign location, (2) outlets for sign and adapter (AC adapter included)
    • Ethernet adapter required for each sign (Part No. LSI-H18501) – requires network information
    • If Ethernet adapters are located at each sign, the RS232 (DB-9) cable (supplied by sign manufacturer – approximately 6ft) to connect the Ethernet adapter.
    • If Ethernet adapters are located in the writing closet, an RS232 (DB-9) cable run is required from the adapter to the sign (connector pin-outs at each end must be as specified by LSI).
    • Wall-mount brackets included.
    • UPS recommended for large signs

     

    Single Port Ethernet to RS232 Adapter (LSI-H18501)

     

    • 1 static IP per device, subnet, gateway, DNS per device
    • Baud rate, parity, stop bit(s), data bits of RS232 connection
    • Standard power
    • Ethernet network connection
    • Uses null-modem adapter (provided by LSI)

    * optional redundant configuration

     

    Download LED Signage Product Sheet