Virtual Server: Requires client to provide virtual environment and network/tech support
Customer Provided Server: Minimum server requirements*
LED Signage & Visual PA – PoE devices
Devices have built-in speaker and 3 flashers (red, white, blue)
Available in small, medium or large size signs – large sign has 2 built-in speakers
1 static IP, subnet, gateway, DNS, per device
3 static IPs, subnet, gateway, DNS, per device if using a redundant configuration
Standard power (110V or 220V) per server
Ethernet network connection required for each server
It is the responsibility of the customer to appropriately configure their network equipment so that the server pair appears to be residing on the same network and subnet.
NOTE: Serial and parallel ports have been disabled on the LSI server
LED Signage and Visual PA (PoE)
DHCP device - If DHCP server is not available, required 1 static IP, subnet, gateway, DNS, per device
PoE capable switch (PoE+ recommended)
Ethernet network connection
Power Injectors: Needed if existing switch does not have PoE+: 30W injectors required for all PoE devices
Customer’s DHCP server TFTP setting must be configured to point to the IP address of their LSI server (Option 150 for a Windows DHCP server).
NOTE: To utilize the Text-to-Speech (TTS) audio component of the Visual PA & LED Signage Devices the TTS Engine and minimum of 2 Ports of Voice must be purchased. To utilize the “Speak Live” functionality over these devices, a phone interface is required. (See PBX Interface requirement options).